×

W-PFS Premium Fuel Polishing Range

section-2dc76e8

The W-PFS range is our most versatile and therefore most popular system for cleaning stored fuel and thus protecting your engine or generator by removing emulsified waterfree water and particulate to 2 micron.

 

The standard units start at 8 lit/min and increase to a maximum of 400 lit/min, with our largest custom built unit being able to handle up to 1600 lit/min (that's nearly 100,000 litres per hour).

Systems typically have manual, automatic (programmable timer) and BMS control as standard via our user friendly touchscreen control system.

 

W-PFS-010-220vac(A wall mounted 10 lit/min system filtering particulate aswell as free and emulsified water.)

They are self pumping and self monitoring fuel cleaning devices which are typically installed near to your fuel tanks. We also offer portable systems, units in IP rated enclosures, and frame mounted units and fieldbus communication options. The PFS range can be custom built to your specifications and we have a wide range of add-on options to meet all your needs.

If you are looking for a simpler, cost effective solution filtering to ,10 micron, we recommend the WB Range .

 

SUITABLE FOR

Tank sizes 7,500 to 1,000,000 litres Cleaning 8-400 litres per minute.

TOUCH SCREEN CONTROL

Easy to use, manual and auto set up, BMS, reporting and trending, export data, Ethernet desktop sharing and much more.

CLEAN TO 2 MICRON

Including removal of emulsified and free water, bacteria, dirt, and particulate.

FUEL PROTECTION

For data centres, generators, hospitals, agricultural tanks, government, embassies, banking, marine...

section-cae559d
section-e33a96f
ModelW-PFS-008
Max flow rate8 lit/min max fuel flow rate **
Recommended Tank size (litres)0-10,000
Power options24V DC

12V DC

Finish optionsWall Mounted, Frame Mounted, Enclosure, Trolley
Particulate removal to2 Micron
Control unitTouch screen - 24V DC

PLC - 12V DC

BMS (Building Management Systems) Outputs7
BMS Inputs2
Fuse24V DC 3A

12V DC 5A

Typical current24V DC 3A

12V DC 5A

Suction capability5m vertical, we always recommend using a non return valve and priming the unit before use.
Port sizes3/4" BSP
Pump BodySteel
GearsPTFE Gears
ShaftStainless steel
SealFluoroelastomer
Dimensions *700x700x250mm
Weight *18kg approx

 

*Measurements are approx

**Flow rates quoted assume the ideal conditions, a large positive head, no lift, large diameter pipework etc. Narrow pipes, tight bends, elbows, lifts and other such external factors can and will impact on the maximum flow achieved by the system.

ModelW-PFS-010
Max flow rate10 lit/min max fuel flow rate **
Recommended Tank size (litres)0-12,500
Power options220V - 50Hz - 1Ph AC

110 V - 60Hz AC

Finish optionsWall Mounted, Frame Mounted, Enclosure, Trolley
Particulate removal to2 Micron
Control unitTouch screen
BMS (Building Management Systems) Outputs7
BMS Inputs2
Fuse220V AC - 3A

110V AC -  6A

Typical current220V AC - 3A

110V AC - 6A

Suction capability5m vertical, we always recommend using a non return valve and priming the unit before use.
Port sizes3/4" BSP
Pump BodySteel
GearsPTFE Gears
ShaftStainless steel
SealFluoroelastomer
Dimensions *700x700x350mm
Weight *21kg approx

*Measurements are approx

**Flow rates quoted assume the ideal conditions, a large positive head, no lift, large diameter pipework etc. Narrow pipes, tight bends, elbows, lifts and other such external factors can and will impact on the maximum flow achieved by the system.

ModelW-PFS-014
Max flow rate14 lit/min max fuel flow rate **
Recommended Tank size (litres)7,500-20,000
Power options24V DC - 5A

12V DC - 10A

Finish optionsWall Mounted, Frame Mounted, Enclosure, Trolley
Particulate removal to2 Micron
Control unitTouch screen - 24V DC

PLC - 12V DC

BMS (Building Management Systems) Outputs7
BMS Inputs2
Fuse24V DC 5A

12V DC 10A

Typical current24V DC 4A

12V DC 9A

Suction capability5m vertical, we always recommend using a non return valve and priming the unit before use.
Port sizes3/4" BSP-P
Pump BodySteel
GearsPTFE Gear
ShaftStainless steel
SealFluoroelastomer
Dimensions *700x700x250mm
Weight *19kg approx

*Measurements are approx

**Flow rates quoted assume the ideal conditions, a large positive head, no lift, large diameter pipework etc. Narrow pipes, tight bends, elbows, lifts and other such external factors can and will impact on the maximum flow achieved by the system.

 

ModelW-PFS-026
Max flow rate26 lit/min max fuel flow rate **
Recommended Tank size (litres)0-30,500
Power options220V - 50Hz - 1Ph AC

110V - 60Hz AC

24V DC

12v DC On Request

Finish optionsWall Mounted, Frame Mounted, Enclosure, Trolley
Particulate removal to2 Micron
Control unitTouch screen
BMS (Building Management Systems) Outputs7
BMS Inputs2
Fuse220V AC - 3A

110V AC - 6A

24V DC - 8A

12V DC - On Request

Typical current220V AC -

110V AC -

24V DC -

12V DC -

Suction capability5m vertical, we always recommend using a non return valve and priming the unit before use.
Port sizes3/4" BSP
Pump BodySteel
GearsPTFE Gears
ShaftStainless steel
SealFluoroelastomer
Dimensions *1000x800x300mm
Weight *42kg approx

 

*Measurements are approx

**Flow rates quoted assume the ideal conditions, a large positive head, no lift, large diameter pipework etc. Narrow pipes, tight bends, elbows, lifts and other such external factors can and will impact on the maximum flow achieved by the system.

ModelW-PFS-040
Max flow rate40 lit/min max fuel flow rate **
Recommended Tank size (litres)0-50,000
Power options220V - 50Hz - 1Ph AC

110V - 60Hz AC

Finish optionsWall Mounted, Frame Mounted, Enclosure, Trolley
Particulate removal to2 Micron
Control unitTouch screen
BMS (Building Management Systems) Outputs7
BMS Inputs2
Fuse220V AC - 5A

110V AC - 6A

Typical current220V AC -

110V AC -

Suction capability5m vertical, we always recommend using a non return valve and priming the unit before use.
Port sizes1" BSP
Pump BodySteel
GearsPTFE Gears
ShaftStainless steel
SealFluoroelastomer
Dimensions *1000x1100x400mm
Weight *65kg approx

 

*Measurements are approx

**Flow rates quoted assume the ideal conditions, a large positive head, no lift, large diameter pipework etc. Narrow pipes, tight bends, elbows, lifts and other such external factors can and will impact on the maximum flow achieved by the system.

ModelW-PFS-060
Max flow rate60 lit/min max fuel flow rate **
Recommended Tank size (litres)Up to 100,000
Power options220V - 50Hz - 1Ph AC

110V - 60Hz AC

Finish optionsWall Mounted, Frame Mounted, Enclosure
Particulate removal to2 Micron
Control unitTouch screen
BMS (Building Management Systems) Outputs7
BMS Inputs2
Fuse220V AC - 5A

110V AC - 6A

Typical current220V AC -

110V AC -

Suction capability5m vertical, we always recommend using a non return valve and priming the unit before use.
Port sizes1 1/2" BSP-P
Pump BodySteel
GearsSliding Vane
ShaftStainless steel
SealFluoroelastomer
Dimensions *1000x1100x400mm
Weight * 75KG approx

*Measurements are approx

**Flow rates quoted assume the ideal conditions, a large positive head, no lift, large diameter pipework etc. Narrow pipes, tight bends, elbows, lifts and other such external factors can and will impact on the maximum flow achieved by the system.

ModelW-PFS-120
Max flow rate120 lit/min max fuel flow rate **
Recommended Tank size (litres)0-250,000
Power options220V - 50Hz - 1Ph AC

110V - 60Hz AC

Finish optionsFrame Mounted with Drip Tray
Particulate removal to2 Micron
Control unitTouch screen
BMS (Building Management Systems) Outputs7
BMS Inputs2
Fuse220V AC - 12A

110V AC - 24A

Typical current220V AC -

110V AC -

Suction capability5m vertical, we always recommend using a non return valve and priming the unit before use.
Port sizes2" BSP
Pump BodySteel
GearsCentrifugal
ShaftStainless steel
SealFluoroelastomer
Dimensions *1000x1800x1500mm
Weight *345kg approx

 

*Measurements are approx

**Flow rates quoted assume the ideal conditions, a large positive head, no lift, large diameter pipework etc. Narrow pipes, tight bends, elbows, lifts and other such external factors can and will impact on the maximum flow achieved by the system.

ModelW-PFS-240
Max flow rate240 lit/min max fuel flow rate **
Recommended Tank size (litres)0-500,000
Power options220V - 50Hz - 1Ph AC

110V - 60Hz AC

Finish optionsFrame Mounted with Drip Tray
Particulate removal to2 Micron
Control unitTouch screen
BMS (Building Management Systems) Outputs7
BMS Inputs2
Fuse220V AC - 12A

110V AC - 24A

Typical current220V AC -

110V AC -

Suction capability5m vertical, we always recommend using a non return valve and priming the unit before use.
Port sizes2" BSP
Pump BodySteel
GearsCentrifugal
ShaftStainless steel
SealFluoroelastomer
Dimensions *2000x1800x400mm
Weight *550kg approx

 

*Measurements are approx

**Flow rates quoted assume the ideal conditions, a large positive head, no lift, large diameter pipework etc. Narrow pipes, tight bends, elbows, lifts and other such external factors can and will impact on the maximum flow achieved by the system.

For more technical information, please see the Technical Details tab.

section-5533f98

Choosing your ideal system..

Is easy as 1, 2, 3 Need help? Contact us

CLEANING SPEED

From 8 lit/min - 240 lit/min

POWER

12vDC, 24v DC or 220v AC?

ADD-ONS

Need a drip tray, multi-tank cleaning, MODBUS, heating, cooling....

WOULD YOU LIKE TO COMPARE THE FEATURES OF THE WB AND THE W-PFS RANGE?

See our early to read comparision chart to ensure your required features are included in your choice

section-3ae687f
Get a Quote

Use this form to get a competitive quote!

How Does It Work?

Learn more about WASP Fuel Polishing Systems

Which Fuel Polishing System?

Try our interactive product selector

WASP Power and Filtration Solutions - supplying fuel polishing systems, filters, additives, pumps, side stream filtration, fuel testing services, generator servicing and oil change systems.

+44(0)1923 606600

North Orbital Commercial Park St Albans, Herts, AL1 1XB, UK