menu

×

W-PFS Premium Fuel Polishing Range

section-2dc76e8

The W-PFS range is our most versatile and therefore most popular system for cleaning stored fuel and thus protecting your engine or generator by removing emulsified water, free water and particulate to 2 micron.

 

The standard units start at 8 lit/min and increase to a maximum of 400 lit/min, with our largest custom built unit being able to handle up to 1600 lit/min (that's nearly 100,000 litres per hour).

Systems typically have manual, automatic (programmable timer) and BMS control as standard via our user friendly touchscreen control system.

 

W-PFS-010-220vac(A wall mounted 10 lit/min system filtering particulate aswell as free and emulsified water.)

They are self pumping and self monitoring fuel cleaning devices which are typically installed near to your fuel tanks. We also offer portable systems, units in IP rated enclosures, and frame mounted units and fieldbus communication options. The PFS range can be custom built to your specifications and we have a wide range of add-on options to meet all your needs.

If you are looking for a simpler, cost effective solution filtering to ,10 micron, we recommend the WB Range .

 

SUITABLE FOR

Tank sizes 7,500 to 1,000,000 litres Cleaning 8-400 litres per minute.

TOUCH SCREEN CONTROL

Easy to use, manual and auto set up, BMS, reporting and trending, export data, Ethernet desktop sharing and much more.

CLEAN TO 2 MICRON

Including removal of emulsified and free water, bacteria, dirt, and particulate.

FUEL PROTECTION

For data centres, generators, hospitals, agricultural tanks, government, embassies, banking, marine...

section-cae559d
10 lit/min in enclosure (10 lit/min diesel cleaning in a stainless steel enclosure for protection from the elements.)
10 lit/min in Enclosure
Trolleymounted (The Trolley mounted add-on is complete with stair climbing wheels for easy manoeuvrability. Ideal for cleaning multiple tanks on multiple locations.)
Trolley Mounted
10 lit/min frame mounted (Frame mounted option for when wall mounting to fuel tank is not an option.)
10 lit/min Frame Mounted Units
Colour touchscreen included (Interactive colour touchscreen for programming, status monitoring, set up and more.)
Colour Touchscreen Included
14 lit/min fuel polishing (14 lit/min fuel polishing system which removes particulate, bacteria, free and emulsified water. Complete with an interactive colour touch screen.)
14 lit/min Fuel Polishing System
Fuel Conditioner (The WASP Fuel Conditioner is a key component of the PFS Fuel Polishing range. The internal magnet neutralises bacteria cells as well as attracts metal filings.)
Fuel Conditioner
26 lit/min multiple tank cleaning (This 26 lit/min fuel polishing system was built to include the 3 tank automatic change over add-on. The customer had 3 fuel tanks on-site and were able to use just one unit to clean all three)
26 lit/min Mult-Tank Cleaning
40 lit/min Multi-tank and dosing (This 40 lit/min unit was built with an automatic 3 tank change over add on included to clean multiple tanks on one site, all programmed via the colour touch-screen. The client also included the dosing add-on which additionally doses all three tanks with biocide as an additional preventative measure against bacterial infection.)
40 lit/min System, 3 Multi-Tank, Stainless Steel Frame & Dosing
40 lit/min remove water and bacteria (40 lit/min fuel polishing system which removes particulate, bacteria, free and emulsified water. Complete with an interactive colour touch screen.)
40 lit/min System
Best quality fittings (Our systems are designed and engineered by our in-house professional fuel filtering team.)
Best Quality Fittings
Add-on: Drip Tray (Drip tray option complete with drain tap for easy draining of contaminates from both filters.)
Add-on: Drip Tray
Add-on: Modbus (Modbus connectivity to ensure compatibility with your building management needs.)
Add-on: Modbus
Installed system (This primed system has just been installed and powered up.)
Installed system
Add-on: Heater /cooler option (Enclosure W-PFS units are supplied with thermostatic ventilation to ensure your system is kept cool in warm ambient temperate. For cooler environments, internal enclosure heaters can also be used to maintain a minimum ambient temperate and avoid condensation.)
Add-on: Heater/Cooler Option
Installation example
Installation Example
Water contamination (There is a visible layer of water at the bottom of this fuel sample. This is often the problem with the bottom of fuel tanks but is not apparent until the water causes damage to the engine. Water is created from condensation and rain leaking in to the tank.)
Water Contamination
Example Installation
Example Installation
26 lit/min with biocide dosing (This wall mounted 26 lit/min system includes the biocide dosing solution aswell as the usual features of the W-PFS.)
26 lit/min with Biocide Dosing
10 lit/min fuel polishing (10 lit/min fuel polishing system which removes particulate, bacteria, free and emulsified water. Complete with an interactive colour touch screen.)
10 lit/min Fuel Polishing
10 l/min with Automatic Water Drain
40 lit/min enclosure (These five units were ordered by one customer for multiple sites. They clean 40 lit/min and are in stainless steel enclosures to provide outside protection.)
40 lit/min Enclosure Unit
40 lit/min with dosing and multitank (This 40 lit/min frame mounted unit includes the dosing and 4 tank automatic tank changeover add-on options.)
40 lit/min with Dosing and Multi-Tank
240 lit/min frame mounted unit
240 lit/min Frame Mounted Unit
section-e33a96f
ModelW-PFS-008
Max flow rate8 lit/min max fuel flow rate **
Recommended Tank size (litres)0-10,000
Power options24V DC

12V DC

Finish optionsWall Mounted, Frame Mounted, Enclosure, Trolley
Particulate removal to2 Micron
Control unitTouch screen - 24V DC

PLC - 12V DC

BMS (Building Management Systems) Outputs7
BMS Inputs2
Fuse24V DC 3A

12V DC 5A

Typical current24V DC 3A

12V DC 5A

Suction capability5m vertical, we always recommend using a non return valve and priming the unit before use.
Port sizes3/4" BSP
Pump BodySteel
GearsPTFE Gears
ShaftStainless steel
SealFluoroelastomer
Dimensions *700x700x250mm
Weight *18kg approx

 

*Measurements are approx

**Flow rates quoted assume the ideal conditions, a large positive head, no lift, large diameter pipework etc. Narrow pipes, tight bends, elbows, lifts and other such external factors can and will impact on the maximum flow achieved by the system.

ModelW-PFS-010
Max flow rate10 lit/min max fuel flow rate **
Recommended Tank size (litres)0-12,500
Power options220V - 50Hz - 1Ph AC

110 V - 60Hz AC

Finish optionsWall Mounted, Frame Mounted, Enclosure, Trolley
Particulate removal to2 Micron
Control unitTouch screen
BMS (Building Management Systems) Outputs7
BMS Inputs2
Fuse220V AC - 3A

110V AC -  6A

Typical current220V AC - 3A

110V AC - 6A

Suction capability5m vertical, we always recommend using a non return valve and priming the unit before use.
Port sizes3/4" BSP
Pump BodySteel
GearsPTFE Gears
ShaftStainless steel
SealFluoroelastomer
Dimensions *700x700x350mm
Weight *21kg approx

*Measurements are approx

**Flow rates quoted assume the ideal conditions, a large positive head, no lift, large diameter pipework etc. Narrow pipes, tight bends, elbows, lifts and other such external factors can and will impact on the maximum flow achieved by the system.

ModelW-PFS-014
Max flow rate14 lit/min max fuel flow rate **
Recommended Tank size (litres)7,500-20,000
Power options24V DC - 5A

12V DC - 10A

Finish optionsWall Mounted, Frame Mounted, Enclosure, Trolley
Particulate removal to2 Micron
Control unitTouch screen - 24V DC

PLC - 12V DC

BMS (Building Management Systems) Outputs7
BMS Inputs2
Fuse24V DC 5A

12V DC 10A

Typical current24V DC 4A

12V DC 9A

Suction capability5m vertical, we always recommend using a non return valve and priming the unit before use.
Port sizes3/4" BSP-P
Pump BodySteel
GearsPTFE Gear
ShaftStainless steel
SealFluoroelastomer
Dimensions *700x700x250mm
Weight *19kg approx

*Measurements are approx

**Flow rates quoted assume the ideal conditions, a large positive head, no lift, large diameter pipework etc. Narrow pipes, tight bends, elbows, lifts and other such external factors can and will impact on the maximum flow achieved by the system.

 

ModelW-PFS-026
Max flow rate26 lit/min max fuel flow rate **
Recommended Tank size (litres)0-30,500
Power options220V - 50Hz - 1Ph AC

110V - 60Hz AC

24V DC

12v DC On Request

Finish optionsWall Mounted, Frame Mounted, Enclosure, Trolley
Particulate removal to2 Micron
Control unitTouch screen
BMS (Building Management Systems) Outputs7
BMS Inputs2
Fuse220V AC - 3A

110V AC - 6A

24V DC - 8A

12V DC - On Request

Typical current220V AC -

110V AC -

24V DC -

12V DC -

Suction capability5m vertical, we always recommend using a non return valve and priming the unit before use.
Port sizes3/4" BSP
Pump BodySteel
GearsPTFE Gears
ShaftStainless steel
SealFluoroelastomer
Dimensions *1000x800x300mm
Weight *42kg approx

 

*Measurements are approx

**Flow rates quoted assume the ideal conditions, a large positive head, no lift, large diameter pipework etc. Narrow pipes, tight bends, elbows, lifts and other such external factors can and will impact on the maximum flow achieved by the system.

ModelW-PFS-040
Max flow rate40 lit/min max fuel flow rate **
Recommended Tank size (litres)0-50,000
Power options220V - 50Hz - 1Ph AC

110V - 60Hz AC

Finish optionsWall Mounted, Frame Mounted, Enclosure, Trolley
Particulate removal to2 Micron
Control unitTouch screen
BMS (Building Management Systems) Outputs7
BMS Inputs2
Fuse220V AC - 5A

110V AC - 6A

Typical current220V AC -

110V AC -

Suction capability5m vertical, we always recommend using a non return valve and priming the unit before use.
Port sizes1" BSP
Pump BodySteel
GearsPTFE Gears
ShaftStainless steel
SealFluoroelastomer
Dimensions *1000x1100x400mm
Weight *65kg approx

 

*Measurements are approx

**Flow rates quoted assume the ideal conditions, a large positive head, no lift, large diameter pipework etc. Narrow pipes, tight bends, elbows, lifts and other such external factors can and will impact on the maximum flow achieved by the system.

ModelW-PFS-060
Max flow rate60 lit/min max fuel flow rate **
Recommended Tank size (litres)Up to 100,000
Power options220V - 50Hz - 1Ph AC

110V - 60Hz AC

Finish optionsWall Mounted, Frame Mounted, Enclosure
Particulate removal to2 Micron
Control unitTouch screen
BMS (Building Management Systems) Outputs7
BMS Inputs2
Fuse220V AC - 5A

110V AC - 6A

Typical current220V AC -

110V AC -

Suction capability5m vertical, we always recommend using a non return valve and priming the unit before use.
Port sizes1 1/2" BSP-P
Pump BodySteel
GearsSliding Vane
ShaftStainless steel
SealFluoroelastomer
Dimensions *1000x1100x400mm
Weight * 75KG approx

*Measurements are approx

**Flow rates quoted assume the ideal conditions, a large positive head, no lift, large diameter pipework etc. Narrow pipes, tight bends, elbows, lifts and other such external factors can and will impact on the maximum flow achieved by the system.

ModelW-PFS-120
Max flow rate120 lit/min max fuel flow rate **
Recommended Tank size (litres)0-250,000
Power options220V - 50Hz - 1Ph AC

110V - 60Hz AC

Finish optionsFrame Mounted with Drip Tray
Particulate removal to2 Micron
Control unitTouch screen
BMS (Building Management Systems) Outputs7
BMS Inputs2
Fuse220V AC - 12A

110V AC - 24A

Typical current220V AC -

110V AC -

Suction capability5m vertical, we always recommend using a non return valve and priming the unit before use.
Port sizes2" BSP
Pump BodySteel
GearsCentrifugal
ShaftStainless steel
SealFluoroelastomer
Dimensions *1000x1800x1500mm
Weight *345kg approx

 

*Measurements are approx

**Flow rates quoted assume the ideal conditions, a large positive head, no lift, large diameter pipework etc. Narrow pipes, tight bends, elbows, lifts and other such external factors can and will impact on the maximum flow achieved by the system.

ModelW-PFS-240
Max flow rate240 lit/min max fuel flow rate **
Recommended Tank size (litres)0-500,000
Power options220V - 50Hz - 1Ph AC

110V - 60Hz AC

Finish optionsFrame Mounted with Drip Tray
Particulate removal to2 Micron
Control unitTouch screen
BMS (Building Management Systems) Outputs7
BMS Inputs2
Fuse220V AC - 12A

110V AC - 24A

Typical current220V AC -

110V AC -

Suction capability5m vertical, we always recommend using a non return valve and priming the unit before use.
Port sizes2" BSP
Pump BodySteel
GearsCentrifugal
ShaftStainless steel
SealFluoroelastomer
Dimensions *2000x1800x400mm
Weight *550kg approx

 

*Measurements are approx

**Flow rates quoted assume the ideal conditions, a large positive head, no lift, large diameter pipework etc. Narrow pipes, tight bends, elbows, lifts and other such external factors can and will impact on the maximum flow achieved by the system.

For more technical information, please see the Technical Details tab.

Add on Options
W-PFS-008 Premium
WB Fuel Cleaning Range
Product Selector
section-5533f98

Choosing your ideal system..

Is easy as 1, 2, 3 Need help? Contact us

CLEANING SPEED

From 8 lit/min - 240 lit/min

POWER

12vDC, 24v DC or 220v AC?

ADD-ONS

Need a drip tray, multi-tank cleaning, MODBUS, heating, cooling....

WOULD YOU LIKE TO COMPARE THE FEATURES OF THE WB AND THE W-PFS RANGE?

See our early to read comparision chart to ensure your required features are included in your choice

Compare Now
section-3ae687f
Get a Quote

Use this form to get a competitive quote!
How Does It Work?

Learn more about WASP Fuel Polishing Systems
Which Fuel Polishing System?

Try our interactive product selector

WASP Power and Filtration Solutions - supplying fuel polishing systems, filters, additives, pumps, side stream filtration, fuel testing services, generator servicing and oil change systems.

+44(0)1923 606600

North Orbital Commercial Park St Albans, Herts, AL1 1XB, UK

(C) WASP PFS 2025