WB Classic Fuel Cleaning Range

If you store fuel for more than a few weeks at a time, or acquire fuel in a country where there are not strict regulations on fuel specification, you should have an effective fuel cleaning system in operation.

Fuel infection from water or other foreign matter can damage or destroy an engine, so maintaining fuel quality is vital.

The WB range of Fuel Cleaning Systems offer a fuel cleaning solution with many of the features of the W-PFS range but is the more cost effective solution. These quality systems will clean your fuel automatically, removing water, bacterial infection, sludge, solid and semi-solid contaminates from your fuel up to 10 micron. The WB Classic range can be custom built to your specifications and we have a wide range of add-on options to meet all your needs.

Available in either 220v 50hz 1ph AC, 110v 60hz AC, 24v DC or 12v DC

If you require touch screen technology, BMS (Building Management Systems) and field bus functionality, emulsified water removal and filtering to 2 micron, we recommend the W-PFS Range.

SUITABLE FOR

Tank sizes up to 50,000 litres Cleaning 10-40

Litres per minute

PLC CONTROL

Manual and auto set up options

FUEL PROTECTION

For marine, generators, yachts and boating, hospitals, agricultural tanks etc

CLEAN TO 10 MICRON

Including free water, bacteria, dirt and particulate.


Model	WB-10	WB-25	WB-40	WB-120
Max flow rate	10 lit/min max flow rate**	25 lit/min max flow rate**	40 lit/min max flow rate**	120 lit/min max flow rate**
Recommended Tank size	0-12,500	10,000 - 30,000	25,000 - 50,000	Up to 150,000
Power options	220V 50Hz 1Ph AC 110V 60Hz 12V DC 24V DC	220V 50Hz 1Ph AC 110V 60Hz 12V DC 24V DC	220V 50Hz 1Ph AC 110V 60Hz 12V DC 24V DC	220V 50Hz 1Ph AC 110V 60Hz (coming soon)
Finish options	Wall Mounted, Frame Mounted, Enclosure, Trolley	Wall Mounted, Frame Mounted, Enclosure, Trolley	Wall Mounted, Frame Mounted, Enclosure, Trolley	Floor Mounted with Integral Drip Tray
Particulate removal to	10 Micron	10 Micron	10 Micron	10 micron
Control unit	PLC	PLC	PLC	PLC
BMS (Building Management Systems) Outputs	1	1	1	1
BMS Inputs	2	2	2	2
Fuse	220V AC 4A 110V 60Hz 8A 12V DC 6A 24V DC 3A	220V AC 2.5A 110V 60Hz 5A 12V DC 10A 24V DC 5A	220VAC 2.5A 110V 60Hz 5A 12V DC 10A 24V DC 5A	220V 50Hz AC - 5A 110V 60Hz (coming soon)
Typical current	220V AC 1A 110V AC 12V DC 2A 24V DC 1A	220V AC 1.5 110V AC 12V DC 2.2A 24V DC 1A	220V AC 1.5A 110V AC 12V DC 24V DC 8A	220V 50Hz AC - 110V 60Hz (coming soon)
Suction capability	5m vertical, we always recommend using a non return valve and priming the unit before use.
Port sizes	3/4" BSP-P Male or 3/4" NPT	1" BSP-P Male or 1" NPT	1" BSP-P Male or 1" NPT	1.5" BSP-P Male or 1.5" NPT
Gears	PTFE Gear	PTFE Gear	PTFE Gear	Sliding Vane
Shaft	Stainless steel	Stainless steel	Stainless steel	Stainless steel
Seal	Fluoroelastomer lip seal	Fluoroelastomer lip seal	Fluoroelastomer lip seal	Fluoroelastomer lip seal
Dimensions *	700x600x240mm (HxWxD Wall mounted)	700x700x350mm (HxWxD Wall mounted)	700x700x350mm (HxWxD Wall mounted)	1400x850x700mm (HxWxD Floor mounted)
Weight *	16kg approx (DC Wall mounted) 19kg approx (AC Wall mounted)	19kg approx (DC Wall Mounted) 21kg approx (AC Wall Mounted)	26kg approx (DC Wall mounted) 29kg approx (AC Wall mounted)	80kg approx (AC Floor mounted)

**Flow rates quoted assume the ideal conditions, a large positive head, no lift, large pipework, etc. Narrow pipes, tight bends, elbows, lifts and other such external factors can and will impact on the maximum flow achieved by the system.

* Dimensions and Weights will vary with mounting type.

Add on Options

Get a Quote

WB-10

WB-25

WB-40

WB-120

Case Studies

Gallery

Product Selector Widget